Auger #1411

AMS Envirodrill Year: 1996 42 HP Teldyne; Mounted On: Custom Built Trailer; TrEngine: , ; Tools/Other Options: 3 leveling jacks, direct push hammer as well as a rotary drill head. Have installed 65' 2" diameter MW's with it.

Auger #1414

Mobile B-61 Year: Ford 300 6 cyl; Mounted On: Int. Paystar S 1900 4X4; TrEngine: Cat; Tools/Other Options: Cat Head, 2 auger racks, 4 sped rotary transmission, heavy duty right angled drive gear box on rotary, power steering, 2 leveling jacks, 10:00 X 20 tires.

No

Picture

Available

Auger #1400

CME 45 Mounted On: Morka buggy; Tools/Other Options: Auto hammer.

Auger #1375

Simco 2400 Year: 1987 3 cyl. Deutz diesel; Mud Pump: dual hyd pump; Mounted On: F-450 4 x 4; TrEngine: 2003, 6.0 turbo diesel; Tools/Other Options: cathead, 140 lb hammer, 100 gal water tank, 20' derrick, front hyd jacks, manual reae jacks, auger and rod racks, 2 tool boxes mounted underneath chassis.

No

Picture

Available

Auger #1374

Mobile B-53 Mounted On: Ford 800; TrEngine: 1992, Diesel; Tools/Other Options: Truck has 116,000 miles, air brakes. Rig has new PTO. Condition: Good.

Auger #1364

Diedrich D-120 Year: 1994; Mud Pump: 3 L 8; Mounted On: GMC topkick; TrEngine: 1994, Cat 3116; Tools/Other Options: double auger rack, 10,000 and 3,500 lbs winches, 500 gal water.

No

Picture

Available

Auger #1362

CME 75 Year: 1992; Mud Pump: 3 L 8 moyno; Mounted On: not mounted; Tools/Other Options: auto auger rack, 140 lb auto hammer, slide base/ with wiggle tail, 10,000 and 3,500 lbs winches.

No

Picture

Available

Auger #1361

CME 75 Year: 1993; Mud Pump: 3 L 8; Mounted On: 1993 INT; TrEngine: 1993, 6 cyl cummins; Tools/Other Options: high torque 6 cyl cummins.

Auger #1342

Mobile B-61-XD; TrEngine: 1982, 300 6 cyl; Tools/Other Options: 34' mast, 12,000 lb pullmaster winch and 2 nd winch is Koerig 3500, wie line on rig 25,000 miles on rig has seen very little use since new.

Auger #1326

CME 75 Year: 1989; Mounted On: Ford 8000; TrEngine: 1989, 5.9 Cummins; Tools/Other Options: 140 lb hammer, rebuilt by CME 11-06, 185k miles, 32 GVW, 50; of 4 1/4 augers.

Auger #1323

Mobile B-57 Year: 1987 300 gas 6 cyl; Mud Pump: 3 L 6 monyo; Mounted On: Ford F-700 4 x 4; TrEngine: 1987, 460 gas; Tools/Other Options: 5,000 lb winch, 3 jacks, in/out slide base, hi/lo speed control, hyd breakout wrench, 149 lb hammer with cat head,.quick disconnect mast for low clearance drilling, 400 gal water tank, 3 tool boxes, dual slide auger racks, under rod storage.

Auger #1310

Simco 2400 SK-1 Year: 1988 Wisconsin VH4D; Mounted On: Simco Model 3600 Trailer; Tools/Other Options: 24 HP air cooled 4 cyl. Gas engine. 5' Stroke, 15' Mast, Cathead, 140# Hammer, tool box, hand jacks. 35' of 8" OD augers.
Also includes small trailer, elec 700 psi steam cleaner, 150 gallon water tank.

Auger #1272

Mobile B-52 Industrial 300 6 Cyl; Mounted On: Ford; TrEngine: 1984, F-600; Tools/Other Options: Engine recently rebuilt. Includes augers. Condition: Runs great!

Auger #1270

1984 Simco Model 5000; Compressor 235-125;
Mud 3 x 4 mission; Mounted Int Tr 1981 466. Tools/Options 200'drill rod.

Auger #1245

CME 45-B Year: 1975 Wisconsin; Compressor: monyo; Mounted On: Ford F-350; TrEngine: 1989, diesel; Tools/Other Options: 3 jacks, new paint, new kelly bar, new seals and hoses.

No

Picture

Available

Auger #1194

Mobile B-61 Mounted On: Ford 700. Tools/Other Options: all wheel drive.

Auger #1185

Mobile B-57 Year: 1989 300 6 cyl gas; Mud Pump: 3 L 6 moyno water pump; Mounted On: Ford F-650; TrEngine: 1989, Diesel; Tools/Other Options: Auto hammer 140lb and 170lb, 3" Extruder, 8,500 lb winch, 3,200lb winch, 1,800 lb winch, 3 jacks, 250 gal water tank with tool boxes mounted underneath, (5' rods) 2 auger racks mounted underneath bed of drill, 4 " flight augers, 4"rock bit, 10' AWJ Drill rods, AwJ Swival hoisting plug.

Auger #1042

CME 45-C Year: 1973 4 cyl wisc, gas; Mounted On: Tadem trailer; TrEngine: 1973; Tools/Other Options: cathead, 2,000 lb winch, moyno 3by6 water pump,18 fty mast,in and out slide base,2 tool boxes, 2 auger racks,tadem tralier with pintle hook, hyd jacks, front mounted pulling winch, new 4 cyl, wisc. Gas engine.

No

Picture

Available

Auger #1029

Ingersoll Rand A-300 Year: 1995; Mud Pump: 3L6 Moyno; Mounted On: Ford F 700; TrEngine: 1995, Diesel; Tools/Other Options: Telescoping Mast, 8,000 # winch, 18,000 Pullback, 8,000 Ft/lb Torgue, top head, 3 jacks, cathead, breakout wrench, good condition.

No

Picture

Available

Auger #998

Mobile B40, L22 Year: 1986 ; Compressor: Sullair 375; Mud Pump: GD 5X6; Mounted On: Ford Tandem; TrEngine: 1987; Tools/Other Options: Powerful B80 gearhead topmount. 21' strock, 6" casing air hammer. High pressure water injection, oiler, fluid mixer for fast drilling. Entire rig gone through recently 2003. Hydraulic jacks, floats on front. Drilling every dat. Condition: Good.

Auger #565

1997 AMS 9600 EC 40 Ft. hollow stem augers (3 1/2), 40 ft. probe and drive rods, 500 liners, 1 concrete bit, 1 AMS probe sampling and cutting table, 1 auger retrieval tool, 3 cutting heads Mounted On 1997 Ford F-350, w/ diesel.