Cable #1676

Bucyrus Erie 36-L Mounted On: Skid; TrEngine: 471 detroit; Tools/Other Options: Approx. 1000' + of 7/8" drill line and approx. 1000' + of 9/16" sandline. Both sand line and drill line cable is like new. 50 ton hook. New brakes. This drill was completely rebuilt from buckeye. This machine like new best one I had in for a long time.

Cable #1653

Bucyrus Erie 22W Year: Continental; Mounted On: International; TrEngine: 1991, DT 466; Tools/Other Options: Tools Included: These have 2X3 Pins - Includes a complete string of tools, 20', 5" Bit, 6" Bit - both are carbide button. Fishing jars, 6' sub, closed rope socket, fishing socket. Next are 2.25X3.25" Pins - complete string of tools, several 6" carbide button bits, 8" gill rock bit, closed rope socket, new open side rope socket, 4' chain wrench, 2 bailers. Condition: Good.

Cable #1637

Bucyrus Erie 22W Year: Continental Gas; Mounted On: Ford LN 9000; TrEngine: Cat 3406; Tools/Other Options: Perfect condition, gas welder mounted, tool boxes, hydraulic front stabilizers, hydraulic mast cylinder, drill bar. Bailer, custom boom crane, one piece mast. Custom rotary head also available for additional cost. Ready to drill
Stem with bit and bailer included.

Cable #1633

E-Z Bore Swinger Year: PTO; Compressor: No; Mud Pump: No; Mounted On: Ford 7000; TrEngine: 1978, Cat 3208; Tools/Other Options: Smeal style telescopic mast which swivels at the base to lift loads from the side in tight locations. Has 7/16" or 1/2" cable, and independent sand line, 2 jacks,truck engine has 95,000 miles. Truck has air brakes and a solid cab. Diamond plate on the platform skirts is rusted but the rest of the ruck bed, frame, cab and tires are good.

Cable #1632

Bucyrus Erie 22W Year: Duetz 4 Cyl; Compressor: No; Mud Pump: No; Mounted On: 686 Mack; Tools/Other Options: Auto braces, 2 speed leveling jacks, 3rd line, stem, rope socket and a recent jackshaft replacement. The derrick is straight, truck is mechanically sound.

Cable #1629

Speedstar 71; Mounted On: GMC chassis; Tools/Other Options: engine rebuilt 2008 Working drill, new:counter shaft,clutch&bearing plates, pinion spudder drive, crank gear, shaft, bearings, sand sheave, crown sheeve.

Cable #1628

Speedstar 71; Mounted On: ford; Tools/Other Options: working and fully equipped, engine rebuilt 2007
ALL new spudder&shave assembly,sheave,bushing,shaft,hubreel-sheave&bushing,counter shaft,clutch and bearing plates,pinion&spudder drive,crank gear, and shaft&bearings.

Cable #1622

Bucyrus Erie 28L waskeshaw gas; Tools/Other Options: 2,000 drill line 7/8. Condition: Like New.

Cable #1606

Bucyrus Erie 36-L Year: Waulcesha; Tools/Other Options: Drill engines are natural gas/LPG. 1 new style, 1 old style.

Cable #1607

Walker-Neer

Cable #1601

Speedstar Keystone 71 Year: 4 cyl cont. gas; Mounted On: Mil 2.5 Ton AWD GMC; Tools/Other Options: GMC has a gas engine, automatic. 3/4" cable, 3 lines, 26' stem, 4-1/2" bailer.

Cable #1585

Bucyrus Erie 20W.

Cable #1586

Bucyrus Erie 20W.

Cable #1583

Speedstar 71 Year: 4 cyl gas Continental; Mounted On: Mack 3 axel; TrEngine: 1971, 6 cyl. Diesel; Tools/Other Options: 3 Line - 3/4" Drilling Line, 5/16" Sand Line, 5/8" Casing Line. Well tooled: 20' drill stem, 20' twisted button bit (4"), 6" & 8" button Bit, 11-1/2" hard faced bit, sand bailer, mud bailer, jars, bumper, tool retriever, drive clamp with wrenches, 6" & 8" drive collars, drill guide, no kink wire line saver, (2) 3-3/4" tool wrenches, 6" casing welding jig, misc. items.

Cable #1579

Loomis Super Clipper. Mounted On: Military Truck. Tools/Other Options: Call for Details

Cable #1580

Bucyrus Erie 22W Mounted On: Chevy Truck; Tools/Other Options: Call for Details.

Cable #1561

Bucyrus Erie 20W Year: 1970; Mounted On: Muskeg Carrier on tracks; TrEngine: 1980; Tools/Other Options: Rebuilt in 2005.

Cable #1553

Bucyrus Erie 22W; Mounted On: Trailer; Tools/Other Options: Just rebuilt. Has hydraulic Jacks. Condition: good.

Cable #1547

Speedstar 72; Mounted On: Unmounted;.

Cable #1546

Bucyrus Erie 20W; Mounted On: Army 6X6.

Cable #1496

Bucyrus Erie 36L Cummins Diesel; Mounted On: Tandem Trailer; Tools/Other Options: Working daily, includes all tools.

Cable #1495

Bucyrus Erie 22W Ford Diesel; Mounted On: Volvo; TrEngine: , Diesel; Tools/Other Options: Working Daily, all tools included.

Cable #1492

Cyclone 36 Year: 4 cyl Continental; Mounted On: Chevy C60; TrEngine: 1974; Tools/Other Options: Single hydraulic piece mast with a completely rebuilt jack shaft which includes new bearings, complete new clutches and turned friction wheel. Comes with an on-board belt driver, Hobart DC welder. Bailer, jar bumper and a mud bucket. No drilling tools included. Working order, ready to use.

Cable #1491

Cyclone 36 Year: 4 cyl. Ford; Mounted On: GMC 6500; TrEngine: 1975; Tools/Other Options: 2 hydraulic piece mast, front & rear hydraulics. Comes with a drilling tool. Has a hydro lift, burn sockets, 5-1/2" carbide button bit. Includes a bailer, jar bumper and a mud bucket. Complete and in excellent shape, ready to use.

Cable #1488

Speedstar 71 Tools/Other Options: Drill Bar, clamp, etc. with it. Working condition. Parts and operating manual..

Cable #1466

Bucyrus Erie 22 w.

Cable #1438

Wichtex T.E. 2 work over rig 478 GM; Mounted On: Ford 600; TrEngine: 1976, 371 Ford; Tools/Other Options: 2 cat heads, propane powered, 35' 65/8 double pole mast, with screw type levling jacks. Double drum draworks, main drum has double sleeve block, sandline has 860' cable.

Cable #1410

Stone 31; Mounted On: Ford; TrEngine: 1978, 6 cyl ford.

No

Picture

Available

Cable #1407

Bucyrus Erie 22 W.

Cable #1371

Bucyrus Erie 24L Year: Continental 6 cyl; Mounted On: Ford F-700; TrEngine: 1980, 370 gas; Tools/Other Options: Drill is early 50's, Red Seal engine, new trident chatter hammer drill stem, everything ran good when parked 10 years ago. Gas engine on truck needs work. Tools include: breakout wrenches, drive clamps, pulling cap, drilling and pulling jars, torpedo, fishing tools, 2 sets of sheaves. May need cable.. Condition: avg for age.

Rotary #1373

Bucyrus Erie 20W Year: 4 cyl; Mounted On: GMC; TrEngine: 1976, ; Tools/Other Options: 3 line machine, new jack shaft, bushings and clutches. New friction wheels for mast and bailer, rebuilt all 3 sheaves, rebuilt mag. Hercules drill engine, tools for 6". New paint. Rig and truck run great. Condition: avg.

Cable #1372

Bucyrus Erie 24W; 6 cyl Int.; Mounted On: F-750; TrEngine: 1978, ; Tools/Other Options: Friction wheel bailer, some tooling included, new drill stem, new trident hydrolifted sub. Condition: avg for age.

Cable #1370

Bucyrus Erie 60L Year: Buda 6 Cyl propane; Mounted On: GMC 6500; TrEngine: 1978, 427CI V8; Tools/Other Options: New paint on truck and rig. All necessary drilling and bailing tools included except for jars. New rear manual outriggers.

Cable #1348

Bucyrus Erie 20W; mounted on 2000 GMC with new 454 engine, Hyd Jacks.

No

Picture

Available

Cable #1336

Bucyrus Erie 22 W series 111 Contiental; Mounted On: GMC 7000; TrEngine: 1990, 366 big block; Tools/Other Options: hyraulic derrick, and jacks.

No

Picture

Available

Cable #1329

Bucyrus Erie 20 W Year: 4 cyl red field; Mounted On: 1981 Ford; TrEngine: , 360 gas.; Tools/Other Options: 2 man jack rebuilt jack shaft 01, 600' 5/8 drill line 3 line machine.

No

Picture

Available

Cable #1332

Keystone Tools/Other Options: 57' mast, 24 in crown sheave, 3 line machine, 18: chain , 3/8 bail line.

Cable #1311

Brewster Mounted On: International; TrEngine: 1986, 466 Diesel; Tools/Other Options: Double Drum, Double Pole, 60' Mast.

No

Picture

Available

Cable #1296

Loomis Super Clipper Year: 1971 gas; Mounted On: Ford; TrEngine: 1995, Diesel; Tools/Other Options: 5", 6", 8", 10" tools. Lots of tools included with drill.

Cable #1255

Bucyrus Erie 20 W; Deutz; Mounted On: Ford F 700; TrEngine: 1990.

No

Picture

Available

Cable #1243

Bucyrus Erie 21 W Year: john deere; Tools/Other Options: 5/8 drill line, 3/8 sand line, 32' derrick, wrenches and a lot of extra tools go with rig.

Cable #1230

Loomis Clipper 24 Year: continental 4 cycl'; Mounted On: Int.; TrEngine: 1986, 7.3 rebuilt diesel; Tools/Other Options: 3 line rig, 2x3x7 tool joint 232' long 4 1/2 dia, catwalks allround, jackshaft rebuilt 03, 42' mast.

Cable #1224

Stone; Mounted On: GMC.

No

Picture

Available

Cable #1225

Bucyrus Erie 22 W Mounted On: kodiak.

Cable #1216

Bucyrus Erie 60 L Year: 6 cyl Budah; Mounted On: Kiaser 6 x6; TrEngine: 1970, 465 Hercules; Tools/Other Options: truck has 1500 hrs on engine, fresh jackshaft bebuild, 1400' of 3/4 line, 1500' sand line, replaced raising line all in good condition. New drive belt, clutches relined, strait braces, casing strut and traveling block, crown pulley bushing are tight, slide bushing are ok but could be replaced. 2 1/4 stem x 20' srem with new rope socket, 20' 4 1/4 bailer, 6" button bit like new, breakout wrenchs, Ready to drill.

Cable #1169

Walker Neer C-32 Mounted On: Trailer; TrEngine: propane; Tools/Other Options: 50' mast. 3/4 drill line, 12 sand line. 4000' machine.

Cable #1056

Bucyrus Erie 22 W Year: wisc. Gas;Mounted On: GMC 6000; TrEngine: 1979, v 8 gas; Tools/Other Options: 3 part line, drill, bull, sand lines, 6" stem and bit jars,breakout wrench, 4" steam and bit, screw jacks.

Cable #1119

Bucyrus Erie 22 W. 4 cyl int.gas; Mounted On: FordV-8 ford 600; TrEngine: 1966, ; Tools/Other Options: 250' drill line and sand line, 4,5,6, inch bits,2 manual screw jacks, 15' x 3 drill stem casing driver, 3 J wrenches, chain wrench, casing clamps.

Cable #1067

Cyclone 36-A Year: 172 hp lincoln; Mounted On: GMC 6500; TrEngine: 1987. Tools/Other Options: new clutch, new brakes, 5" tools, $ 500' new cable, drilling platform, has 55' of auger plus bit, new drive belts.

No

Picture

Available

Cable #1020

Speedstar 71 Mounted On: GMC 7500; TrEngine: 1976, 366 Gas; Tools/Other Options: None listed.

No

Picture

Available

Cable #940

Bucyrus Erie 21W

Cable #315

Speedstar 71 4 Cyl. Continental Gas Deck Engine. 2 Line Machine, Truck Needs Work. Mounted On 1964 Ford. Rig In Good Condition.