Rotary #1639

AMS Power Probe 9600 Year: 2000 3 Cyl. Diesel; Tools/Other Options: Direct Push, Hammer, Rotary Head, Storage, Slide Base, Wiggle Tail.

Rotary #1564

Bucyrus Erie 12-R Year: 1974 6V71 Detroit; Compressor: Leroi 500/250; Mounted On: Ford; TrEngine: 1974, 3208 Cat; Tools/Other Options: 4 motor tophead. Compressor rebuilt 3 wells ago. Truck has a 5X3 transmission, king swivel, rebuilt by Vulcan machine. 700' of 4-1/2" X 20' X 3-1/2" IF drill pipe, Pipe is 80% + of being new.

1978 International Flatwater with a DT 466, 1600 gallon flat tank, new clutch, rebuilt transmision.

Mission 4X3X14" centrifical mud pump. Powered by 292 inernational GMC gas engine, 4 speed transmission, trailer mounted. 25' new suction hose and foot valve.

2nd owner of rig - no rust excellent rig for the money. All equipment runs good, has a sandline, retractable table, 3 line leveling jacks.

.

Rotary #1568

Brewster N3 Year: CAT 3306T; Compressor: Wabco; Mounted On: Dual axle drop deck trlr.; Tools/Other Options: 3,500' Capacity. 320 HP engine, 200 gallon fuel tank, Spencer Harris 97' X 200,000# capacity hydraulically telescoped derrick. Breswter N3 single drum drawworks with 44" brakes. Foster catheads, 7/8" diameter drilling line. Drill pipe racking board, 7' high back-up substructure. Brewster B-18, 18" X 44" rotary table. Detroit 20 kVA, 3 phase, 60 HZ generator (4900 hours).

Rotary #1418

Badger 1250 Compressor: 100 S-1 LeRoi; Mud Pump: 5X6; Mounted On: Int. Paystar 5070; TrEngine: , 290 Cummins; Tools/Other Options: 13 speed transmission with 3TA Fuller auxillary. Bean Injection Pump with jet tank. Fully rebuilt, customized and refurbished, 23' Kelly, 2'6" Little Giant Swivel, 7-1/2" 2000 rotary table, 1250 air-clutched draw-works, hydraulic pull-down, soap tank, 2 air clutched hydraulic leveling jacks, pipie rack with slide, Imron paint.

Rotary #1423

Badger 1250 Compressor: 100 S-1 LeRoi; Mud Pump: 5X6 Duplex; Mounted On: Ford 9000; TrEngine: , 290 Cummins; Tools/Other Options: Big Cam engine, full overhauled, low hours, 13 speed transmission with 3TA fuller auxillary, new clutch. Bean Inj. Pump with jet tank. Fully rebuilt & customized MUD & AIR COMBO RIG. 2-1/2" Little Giant swivel, 23' kelly, 7-1/2" 2000 rotary table, 1250 air clutched draw works, hydraulic pull down system, 3 leveling jacks (front & rear), pipe rack with slide, Imron paint.
Rebuilt in 2006, option to mount 256 LeRoi Compressor with new clutch if needed.

Rotary #1348

Bucyrus Erie 20W; mounted on 2000 GMC with new 454 engine, Hyd Jacks.

Rotary #1170

Brewster Skytop Year: 1972; Mud Pump: 7 1/4 x 10 GD with 6-71; Mounted On: CCC; TrEngine: 1972, 6v-71; Tools/Other Options: 3 speed allison transmission, 18" failing rotary table. Large working floor, 54' mast(can handle double random casing) Drawworks, skytop model H 35 with wichita air clutch and 2-32 x 8" brake drum, 7/8 wire rope, grooved spool. Hydraulic utility winch-king mod. HD 100. 4 hydraulic leveling jacks, sowa 3 sheave traveling block, packer jr. weight indicator 75,000 #, King 25 xv swival, 26' fluted kelly with 3.5 IF pin and saver sub, Hydraulic break out cylinder, webb wilson type c breakout tongs, drill pipe elevator, complete set of box x box bit subs for API bits and 3.5 IF drill pipe, 7 1/4 x 10 Gardner Denver mud pump with 6-71 diesel engine on skid with valves, mud lines, gauge and relief value, complete drilling package to drill.

Rotary #1204

Bucyrus Erie Series 1 Year: Perkins diesel; Compressor: ; Mud Pump: ; Mounted On: Mack; TrEngine: 1965, B 61 diesel; Tools/Other Options: Hydraulic jacks & breakout , twin disk sandline, toolguide new jackshaft, and bearings, crown assembly by buckeye drill in 2002, large tool box.

No

Picture

Available

Rotary #953

BE 10 R. Tools/Other Options: table drive.

Rotary #843

Bucyrus Erie 20W Allis; Mounted On: 1971 GMC; TrEngine: V6 351; Tools/Other Options: 3 Line, auto folding braces & tool guide, cat walks, cat heads. Garage kept. Condition: Excellent!