Rotary #1447

Chicago Pneumatic T-650 Year: 1982 3406; Compressor: 825-300; Mounted On: Int; TrEngine: 1982, dt 466; Tools/Other Options: 800' drill rod, compressor just rebuilt o time, engine rebuilt 2000 hrs ago, rebuilt head, new rear end rebuilt, rebuilt pulldown cylinders.

No

Picture

Available

Rotary #1428

Chicago Pneumatic T-650 SS Explorer Year: 1982 3406 Cat; Compressor: 825-300 GHH; Mounted On: CCC; TrEngine: 1982, Cat; Tools/Other Options: 500' drill rods 4 1/2 x 20'.

Rotary #1413

Chicago Pneumatic T-650w Year: 250 HP Cat; Compressor: 450/250 CP; Mounted On: Kenworth; TrEngine: 1989, 400 HP Cat; Tools/Other Options: 300' OF 4.5 x 20' Drill Pipe, 9 gpm Bean duplex inj. Pump, all hand tools, table bushing, Bob Cat 225 miller welder with cables, rod sling, night lighting, line oiler (air), 4000#, 20,000# front end jake brake, 46,000# rear (double lock-ups),Mudgrip tires on rear, spare tire carrier behind cab, rack for carrying chuck blocks.

No

Picture

Available

Rotary #1398

Chicago Pneumatic T-672 Year: 1974; Compressor: 600 x 250 GHH; Mounted On: GMC; TrEngine: 1974, 6v54 detroit; Tools/Other Options: Heavy hoist, ex mast, 300' drill rod.

No

Picture

Available

Rotary #1386

Cyclone 35 R combo Year: 1964; Mud Pump: 5 x 6 GD; Mounted On: IHC; TrEngine: 1992, DT 466; Tools/Other Options: Tandem axel, 28' mast, 15' Kelly, Hydraulic pulldown, 235' of 2 7/8 x 2 3/8 FE thread drill rod, 14' drill stem and drive clamp, 4 1/4 retractable table, 3 jacks, 2 ford industrial motors both rebuilt, 3' by 6' mud pan, 330' drill cable 6 months old, 5 x 6 GD mud pump, (fluid end 75%).

Rotary #1365

Chicago Pneumatic

Rotary #1358

Chicago Pneumatic T-650 Year: 1977 cat 3406; Compressor: 825 x 300 GHH; Mounted On: Ford 8000; TrEngine: 1977, 3208; Tools/Other Options: 300' drill rod.

No

Picture

Available

Rotary #1345

Chicago Pneumatic T-700 Magnum Year: 1983 Cummins; Compressor: 900-300 Sullair; Mounted On: Four Axel carrier; TrEngine: 1983, Detroit; Tools/Other Options: 6,000' 3 1/2" x 30' drill pipe, 3 jacks, 20 kw generator, deck mounted. Powered by Detroit, Sullair 900cfm @ 350 psi compressor, powered by detroit diesel skid mounted(unit completely refurbished) dog house, 3000 gal fuel tank, soap tank tri-plex soap pump, mounted on tandem axel trailer, all small handling tools for pipe handling, this rig has had extensive refurbishment with in the last 6 months.

Rotary #1338

Chicago Pneumatic T-650 WS Year: 1979 3406; Compressor: 825-300; Mounted On: Ford 8000; TrEngine: 1979, 3208.

Rotary #1335

Chicago Pneumatic T-650 WS Year: 1978 3406; Compressor: 825-300; Mounted On: INT; TrEngine: 1988, L-10 Cummins.

Rotary #1333

Chicago Pneumatic RT-2500 Year: 1981; Compressor: 840-350 GHH; Mounted On: Hen; TrEngine: 1981, 300 Cummins; Tools/Other Options: 50' mast, 30' kelly, drill steel 1000' 3 1/2 x 30', 20" table, hopist 70,000 lb, cable and chain auto feed, all small tools, jacks, tires good shape, rig welder, truck cab in good shape, low miles, retractable rotary table, 2 of 4 hyd pumps replaced with new.

Rotary #1324

Chicago Pneumatic T-700 WH Year: 1978; Compressor: 840-350; TrEngine: 1978; Tools/Other Options: 2,800' drill rods, 39' stroke,slips, bushings.

Rotary #1317

Cyclone TH-60-36 Year: 1978; Compressor: Dev 330-130; Mud Pump: 3x4; Mounted On: INT. 1850; TrEngine: 1978, 3208; Tools/Other Options: 240' drill rod, new clutch, casing hammer.

Rotary #1316

Challenger 320M Year: 1981 Detroit 8V92NA; Mud Pump: GD 7-1/2" X 10"; Mounted On: 3 Axle Trailer; Tools/Other Options: 380 HP engine, double drum stacked drawwords with PO221 clutches and 8" X 32" double brakes, McKissick 75T three sheave blocks, 18" Howawrd Turner with variable speed from 25 to 250 rpm, 64' derrick rated to 150,000#, Allison 5860 transmission, racking board, block & hook, 3-1/2" ID water course swivel, PARMAC hydromatic brake, catheads, deck mounted mud pump.

Rotary #1275

Chicago Pneumatic T-650 WS Year: 1979 3406; Compressor: 825-350 GHH; Mounted On: Ford 8000; TrEngine: 1979, 3208; Tools/Other Options: 260' drill rod, all pumps rebuilt last year.

No

Picture

Available

Rotary #1273

Chicago Pneumatic T-650 WS Year: 1977 Cat 3406; Compressor: 825x300 GHH; Mounted On: Ford 8000; TrEngine: 1977, 3208 Cat; Tools/Other Options: 300' drill rod.

No

Picture

Available

Rotary #1254

Chicago Pneumatic T-650 HH Year: 1980 3406; Compressor: 825-300; Mounted On: CCC; TrEngine: 1980; Tools/Other Options: new engine, 1000' drill rod 50K hoist.

No

Picture

Available

Rotary #1242

Cyclone 35 TH 50 Year: 1972 4 cyl; Compressor: GD 100; Mud Pump: 5 x 6 GD; Mounted On: Ford; TrEngine: 1985, 3406 cat; Tools/Other Options: Ford Ind. 6 cyl drawworks, ford ind 4 cyl. Pump and air, 10 k sweival, tophead new 6-15-05, charden hyd motors 4, 240' 3" x 15' drill rods, tires 95% front, 90% rears, comes with 88 ford 9000 with 300 Cummins 10 speed water truck with 2,400 gal, 11 hp chem grouter.

Rotary #1182

Chicago Pneumatic T-650 Year: 1977 cat 3306; Compressor: 450-250; Mounted On: Ford; TrEngine: 1977, 3208; Tools/Other Options: 300' dril rod 25' 4 1/2 x 25', water inj, caro.new motor on head.

No

Picture

Available

Rotary #1172

Chicago Pneumatic T-650 Year: 1971 3306; Compressor: 450-250; Mounted On: Ford 9000; TrEngine: 1971, cummins diesel; Tools/Other Options: carousel, stablizer, 300' drill rods, air lubricator. Good starter rig.

No

Picture

Available

Rotary #1139

Chemgrant grout plant. Tools/Other Options: 1,000 psi, newer vanguard engine, original engine for back up, very low hrs.

Rotary #1051

Chicago Pneumatic T-650 WS Year: 1984 3406 cat; Compressor: 850-350; Mounted On: General; TrEngine: 1984; Tools/Other Options: jack brake, 300' steel. Water injection, slips and bushings and break out wrench.

No

Picture

Available

Rotary #1021

Chicago Pneumatic 650 Year: 1964 6 v 71; Compressor: 450-250; Mounted On: ford 9000. Tools/Other Options: 420' drill rod.

Rotary #822

Chicago Pneumatic CP T-650 Year: 1973 333 Cat Rebuilt; Compressor: 450/250 Rebuilt; Mud Pump: 5 X 6 GD; Mounted On: 1973 Ford; TrEngine: Gasoline; Tools/Other Options: Rod box, Carousel, Rebuilt head & head motor, 200' of 4-1/2" X 20', Rebuilt clutch, Rebuilt chain case. Condition: Good.