Rotary #1669

Deeprock 100 Year: (2) Gas; Compressor: Yes; Mud Pump: 2" diaphragm; Mounted On: Mitsubishi Fuso 4X4; TrEngine: , Diesel; Tools/Other Options: Mud pump has a separate engine, ext. mast, winch, jib boom, breakout coupling, (4) hydraulic jacks. Ready to go, good geothermal drill., 300' - 400' capability.

Rotary #1638

Deeprock DR 130 Year: 90's Diesel; Mud Pump: 2X3X11 Mission; Mounted On: Ford F550; TrEngine: 7.3 Diesel; Tools/Other Options: Ford is a 6 spd., AC, 40K miles, 4X4. DR 130 top head, 3 stabilizer jacks, winch, slide base, mud tub, telescopic mast with jib. Needs work - Hyd. Hoses, paint, winch, breakout coupling. 10' drill rods. 500' capabilities.

Rotary #1616

Drilltech D 25 Year: 1987 ; Compressor: 840/350; Mounted On: Ford 8000; TrEngine: 1987, 240; Tools/Other Options: 780' of drill steel.
89,000 miles on Ford 8000, 13 speed RR Transmission.
1993 FORD 9000 SERVICE TRUCK
350 Cummins, 9 speed RR transmission, power steering, Pulling tandems, 24' steel bed, 1800 gallon water tank, 170 gallon fuel tank, electric fuel pump, tool boxes, new brake drums on rear & brakes.
HAMMERS:
(1) ql. 6" Oiless Copco - 4 bits 90% good
(1) Mencom 8" - 2 bits 95% good
(1) Spiral stabilizer bar & bit 95% good
(1) 8" Stabilizer Bar
(2) Over reamers 15" 23' - 12" 23' Long
(1) 12" Wing Bit
(1) 4" Casing Clamp
(1) Casing Trailer
ALL TOOLS FOR RIG - READY TO DRILL
ONE OWNER - ONE OPERATOR. Condition: Good.

Rotary #1562

DSI Quickdrill 275; Compressor: 250/150; Mud Pump: GD 5X6; Tools/Other Options: 200' 2-7/8" X 20' drill rod included. Also includes Hand Tools, J Wrench, Lift Sling, Bushings for Table.

Rotary #1490

Drill Tech D-40K Year: 1993 3408 Cat; Compressor: 1000/350 Sulair; Mud Pump: 5X6 Air Drive; Mounted On: 6X4 CCC; TrEngine: 1992, Cummins 260HP; Tools/Other Options: 8900 Hours on Drill, 3190 hours on crane carrier, 4500 hours on compressor, 5500 hours on Cat engine, 4000 hours on rotary head. 50,000# hydraulics. Inside loader for (6) pcs. 4-1/2" X 25' drill pipe, bit breaker, 4-1/2" pipe wiper, split bushig. Compressor airline blowdown, 20 GPM water injection, diesel pre-heater, remote control station, control panel cover, tow hooks, 100 PSI air regulator, remote start receptacles, 172" swing jib boom group, 6" - 8" hammer holder & stabilizer holder. 300' of 4-1/2" X 25' Long drill pipe. (2) carousels.

Rotary #1478

Drilltech D-25KW Year: 1996 Cat 3406; Compressor: Sullair 900/350; Mounted On: Ford L8000; TrEngine: Cummins 300 HP; Tools/Other Options: New Rear rough terrain tires, new 60 breakout wrench, bean injection pump, four hydraulic outriggers, standard mast and pull back, hammer oiler, 6 rod carousel, 1100' 4.5 X 20' drill rods, 20' stabilizer, new compressor oil, 1 - IR strike force2 6" hammer,
, 1-3 7/8" X 6'5/8" bit sub, 1- 3 reg X 4 bit sub, 1- 4 reg X 6-5/8" reg bit sub, 2- 3-7/8" if X 3 reg subs, 2- 3 reg X 3-7/8" if subs, 1- 3-7/8" if X 3'7/8" if pin X pin sub, 1- 3-7/8" if X 3-7/8" if saver sub, 5 new 6" hammer button bits, 1-7" hammer button bit, 2- 9" hammer button bits, 1- new 14" roller mill tooth, 1- new 11" roller mill tooth, 1- 11" roller button.

1 - GD 4X5 AIR DUPLEX MUD PUMP mounted on a tandem axel trailer. Needs new screen

1994 GMC TOP KICK 5 TON PIPE TRUCK, dump and scissor lift bed, Cat 3116 engine, new rear tires.

MUD SHAKER TRAILER

100 GALLON TUB FOR FOAM, 750 GALLON POLY TANK, 1750 GALLON POLY TANK.

Suction and pressure hose for mud pump, 4- casing elevators, 5-casing elevators. Condition: Good

.

Rotary #1476

Drilltech Year: 1992; Compressor: 900 X 350; Mounted On: ford; Tools/Other Options: 600' DRILL ROD.

Rotary #1460

Dietrick 120 Year: 1991 detuz; Mud Pump: 3 ll 8; Mounted On: ford; TrEngine: 1991, diesel; Tools/Other Options: water tank , rod box, cat head , hydraulic rod clamp, breakout wrench, tool boxes, n3 rod 130'.

Rotary #1455

Drilltech M-5 Year: 2006; Compressor: 1050 x 359; TrEngine: 2006.

Rotary #1433

Drilltech D-25 Year: 1997 Cat 3406; Compressor: 900-350; Mounted On: Ford; TrEngine: 1997, 300 hp; Tools/Other Options: pullback 30,000, 28' head travel, pipe rack for 15 pc. 20' drill rods 520', pipe loader, auxiliaryremote controk station, jib boom with hyd extend with 180 swing, winch is 7,500 lb drill table 20' opening with hyd adjustment, breakout with 48" jaw type, night lights, fine feed for torque control, lubricator with 10 gal tankll Year: 1978; Compressor: 250 x 125; Mud Pump: 5 x 6 GD; Mounted On: Ford; TrEngine: 1978, 3208; Tools/Other Options: 200' drill rod, all slip and bushings.

Rotary #1430

Drilltech D-25 Year: 1987 ; Compressor: 840-350; TrEngine: 1987; Tools/Other Options: 300' drill rod, compressor has low hrs.

Rotary #1406

DSI Quickdrill Year: 1978; Compressor: 250 x 125; Mud Pump: 5 x 6 GD; Mounted On: Ford; TrEngine: 1978, 3208; Tools/Other Options: 200' drill rod, all slip and bushings.

Rotary #1382

DSI Quickdrill Year: 1978; Compressor: 220 x 125; Mud Pump: 5 x 6; Mounted On: Ford F-7000; TrEngine: 1978, 3408; Tools/Other Options: 260' drill rods, dual head motor, 6" hammer.

Rotary #1350

Drilltech D 60 K !! Year: 1985; Compressor: 1250 cfm x 150 psi; Mud Pump: 510 P oil well mud pump; Mounted On: trailer mounted; Tools/Other Options: pipe loading arm, hobart welder and 15,000 watt generator mounted on deck, 3,000' of 4 1/2 drill rods, pipe trailer, hyd pipe racks, dog house with 1250 gal fuel tank on front, 1979 Mack winch truck with rolling tail board.

Rotary #1355

Deeprock DR 150 Year: 2003; Mud Pump: Rupp mud piston pump; Mounted On: Ford F 750 4 x 4; TrEngine: 2003, 5.9 cummins; Tools/Other Options: tophead travel 11' 4 ", pulldown 12,000 lbs, pullback 16,000 lbs, variable hydrostatic, high (all speeds) 420 hrs on rig.top head swivel with 2" water course. 300' mayhew jrs 10' auto rod handling system.

Rotary #1360

Drilltech D 25 K !! Year: 1983; Compressor: 750-250; Mounted On: CCC; Tools/Other Options: 300' drill rod.

Rotary #1325

Drilltech D-25 Year: 1997 3406 E; Compressor: 900-350; Mounted On: Ford; TrEngine: 1996, 295 ford; Tools/Other Options: 420 4 1/2 x 20', compressor rebuilt 06, truck tran, rebuilt 06.

Rotary #1331

Davey M-8 Year: GM 4 cyl; Compressor: Davey 400 cf 185; Mounted On: 1974 Ford; TrEngine: , V-8; Tools/Other Options: 4 " kelly 25' , 32' mast, 3/4 line on draw works, 3 jacks.

Rotary #1306

Drillmaster Year: 1995; Compressor: Sullair 300/200; Mud Pump: 5X6 GD piston; Mounted On: Int. 4900 4X4; TrEngine: 1995, DT 466 Diesel; Tools/Other Options: 06 - mud pump being totally rebuilt, fluid end and power end. Moyno 3L6 water pump, air operated diaphram pump, gear box with 4 pump drive, (2) pumps rebuilt and 2 new pumps. Top head rebearinged. Top head is 2 speed control, single rod loader and rod rack. Hydraulic run breakout. Truck engine power to transfer case, transfer case totally rebuilt 10/06, new rear ends and new axles in 06. 7 speed transmission. 600' of 2-3/8" X 20' drill rod with MJ thread, all subs and bushings.

Rotary #1256

Drilltech D-25 Year: 1998 cvat; Compressor: 900-350; Mounted On: Ford; TrEngine: 1998; Tools/Other Options: 360 drill rod.