Rotary #1453

Gardner Denver 500; Mounted On: Ford; TrEngine: 1990, 450 diesel; Tools/Other Options: 140,000 miles, moves 180.

Rotary #1452

Gefco 50K; Compressor: 1000 x 350 Sullair; Mounted On: Kenwortj T-900 W; TrEngine: 2006, 565 HP ISX Cumm; Tools/Other Options: single rod loader, 6 pod carsousel, 2,937 hrs on engine, 2115 hrs on compressor.

Rotary #1448

Green Manufacturing 2500 series Year: 300 ford propane; Mud Pump: 4 x 5 centrifical; Mounted On: GMC 9500; TrEngine: , 6 V 92; Tools/Other Options: shallow oil and gas rig, 18" rotary table air activated, direct drive double drum drawworks, 52' mastnew diamond plate floor, 6" by 40ft king swival kelly, worklights, 9 speed, 600' of 4 1/2 x 31' drill rod, 1 31'73/4odx21/2id drill collar, rig comes with all the make up tools to drill there is a 40' float this is a complete package.

Rotary #1434

Gus Pech H-48 super george Year: 1977 391; Mounted On: Mack; TrEngine: 1977, 300; Tools/Other Options: 35' mast with 100' 4 stage x 25' foot kelly, plus 25' ext. 48" turntable, main winch is 14,000 lbs pull. Sand winch 9000 lbs pull. 3 jacks, 24' and 36' buckets with machine, bucket will ream to 48'.

Rotary #1415

Gardner Denver 1000 Heavy Duty; Compressor: 667 GD; Mud Pump: 5X6 GD; Mounted On: Mack; TrEngine: 235 hp Diesel; Tools/Other Options: Bean Injection Pump, Rebuilt & customized in 2001, 1000 rotary table with 5 speed transmission, 1250 air-clutched draw-works, 4 speed hydraulic pull-down,2 hydraulic leveling jacks, pipe rack with slide.

Rotary #1417

Gardner Denver 1000 Heavy-Duty; Compressor: 580 GD; Mud Pump: 5X6; Mounted On: Mack Truck; TrEngine: 285 hp Mack; Tools/Other Options: Newly rebuilt & customized, hydraulic pull-down, 23' Kelly, 1250 air clutched draw-works, 5-1/2" 1000 rotary table, heavy duty swivel, pipe rack with slide, 2 hydraulic leveling jacks.

Rotary #1420

Gardner Denver 1000 Heavy Duty; Compressor: 667 GD; Mud Pump: 5X6; Mounted On: Mack Truck; TrEngine: 285 hp; Tools/Other Options: Fully refurbished, 1000 rotary table, 1250 air draw-works, hydraulic pull down, 2 hydraulic leveling jacks, pipe rack with slide.

Rotary #1422

Gardner Denver; Compressor: 50 S-1 LeRoi; Mud Pump: 5X6; Mounted On: Ford Diesel 4X4; TrEngine: 8.2L Detroit; Tools/Other Options: Engine overhauled, 5 speed transmission with auxiliary and heavy duty transfer case, 4 cyl Bean Inj. Pump. IDEAL FOR ALL-TERRAIN ENVIRONMENTAL, compact & custom rotary rig modified for A-T drilling, 5-1/2" rotary table, 13' kelly (10' drill pipe), 1250 air clutched draw works, 2 hydraulic leveling jacks, double framed chassis, floatation tires, front mounted Ramsey winch, pipe rack with slide. Rebuilt 2002.
MATCHING WATER TRUCK INCLUDED.

Rotary #1395

Gardner Denver 1000 Year: 1980; Compressor: G.D. 500 x 250; Mud Pump: 5 x 6 G.D.; Mounted On: Ford 8000; TrEngine: 1977; Tools/Other Options: Chain pulldown. Complete drilling pkg.
340' 2-3/8" X2-7/8" drill rods, 2-7/8" tool joint with bits & subs. 350 gallon al mud tub. All kinds of misc tools, pipe wrenches, hand & air
VEHICLES:
1990 Ford 8000 water truck w/ 1500 gal tank
1999 Ford Ranger XLT 4X4 a/c am/fm cassette
1998 Chevy Silverado 4X4 a/c am/fm al tool bxs
1996 Dodge 1500 4X4 needs work/runs
2310 Ditch witch with trailer
Other Equipment:
2 pressure washers (1 new 1 used)
Drill Press, new 20 ton press band, (2) 2" Honda gas pumps, (1) 2" veramatic diaphgram pump, (1) Honda air compressor, (2) new welders, (1) 220 elec shop arc welder (1) wire feed 140, 50 gallon fuel tnk with elec. transfer
Too much more to list..

Rotary #1393

Gardner Denver 2000 Year: 1977;Mounted On: Kenthworth; TrEngine: 1977, 400 cumm; Tools/Other Options: 18 " rotary table, double drum, king swivel, kelly 4" x 38', air controls, pulldown, jacks, engine rebuilt.

Rotary #1392

Gardner Denver 1500 Year: 1977; Compressor: WEJ 750 x 350; Mud Pump: 5 1/2 x 10 mud; Mounted On: Mack; TrEngine: 1977, 350 cummins; Tools/Other Options: break out tongs, 40 drtill rods 4 1/2 x 40' long tower.

Rotary #1287

Gardner Denver 15W Year: 1970; Compressor: 750/250; Mud Pump: 5X6; Mounted On: CCC 4 axle; TrEngine: , 350 Cummins; Tools/Other Options: 10" retractable table, 3 line machine, 7 GPM water injection, 360' - 4" drill rod, 200' - 2-3/8" drill rod. Bits & Subs, new breakout installed recently. Kelly in good shape.

Rotary #1200

Gardner Denver 1000 Year: 1984 PTO; Compressor: 580 GD; Mud Pump: 5x6 GD; Mounted On: Int; TrEngine: 1992, DT 466; Tools/Other Options: 300 2 3/8 if rods, 5 1/4 retractable table, 4 jacks.air pto, everything rebuilt.

Rotary #1268

Gardner Denver 1000. Mud Pump: 5X6 GD; Mounted On: International Paystar; TrEngine: 1983, 290 Cummins; Tools/Other Options: 7 1/2" rotary table, new liners, rods and pistons in mud pump, 3 leveling jacks, 1450 draw works (6" brake drums) truck has 13 speed transmission.