Rotary #1674

Ingersoll Rand T3W Year: 1988 Cummins; Compressor: HR 2 825/350; Mounted On: Ford 8000; TrEngine: , 300 HP; Tools/Other Options: Deck engine - NTTA855, Standard 34' Derrick with 26,500# Pullback, 12,000# Main Winch, Bean 18 GPM Water Injection Pump, 7 gallon DHD Lubricator, Set up for 4-1/2" drill pipe. Includes 420' of drill pipe.

Rotary #1671

Ingersoll Rand RD-20 Year: 2007; Mounted On: CCC; Tools/Other Options: Put in service 12/5/08. Includes 6500' of grade E drill steel, (2) rig sub-structures, (2) 2007 Rogers pipe trailers. 1414 hours as of 6-10-09.

Rotary #1664

Ingersoll Rand TH-60 Year: 1981 PTO; Compressor: 750/250 IR; Mud Pump: 4X3X13; Mounted On: Int. Paystar 5000; TrEngine: , Det. 8V92TA; Tools/Other Options: 38' Derrick with 29,500# Pullback, Gearmatic 16,000# single line main winch, high speed 2,000# capacity sandline drum, Mission Magnum Mud pump is hydraulically powered, 7 rod carousel for 4-1/2" drill pipe, Cat 25 GPM water injection pump, down hole drill lubricator, 4 hydraulic leveling jacks.
Repair History:
Detroit 8V92TA rebuilt in 2007, new drive clutch, new compressor clutch in 2007. New mission magnum pump, new king swivel in 2008. Hydraulic jacks were rebuilt in 2008.

Rotary #1659

Ideco H30 Year: Detriot 50 series; Mounted On: Trailer; Tools/Other Options: Detroit diesel rebuilt, complete crown to the ground, category 4, 0 hours, rebuild by NOV Mobil Rig Division. 4 axel drive in chassis (rebuilt), Double drum drawworks with 1" line (new), IDECO 70' , 120,000# scoped and raised derrick (rebuilt) McKissick 82A, 75 ton block (new), 12 volt rig lighting system (new), Allison transmission 4460 (rebuilt), Bosch Rexroth (Wabco) air valves (new), air line system, brakes, tires (new), decking and stairways (new), hydraulic system (new), rig electrical system (new). Complete certification & documentation of rig mfg. process available upon request - too many items to list. 6 month NOV warranty. Condition: Good.

Rotary #1640

Ingersoll Rand T4 Year: 1974 Detroit 12V71; Compressor: 750/250; Mounted On: CCC; TrEngine: Detroit 653; Tools/Other Options: New bearings in compressor - 2006. Deck engine rebuilt in 2006. Hydraulic pumps reworked in 2006, 900/350 hydraulic cooling package, breakdown wrenches, table bushing. 13 speed Road Ranger transmission in CCC. (2) Carousels, (2) Jib booms, Bean 10gpm water pump, 200' of drill steel.

Rotary #1631

Ingersoll Rand TH-75W Year: Cummins KTA-19C 525 HP; Compressor: IR HR-2 900/350 screw; Mud Pump: NO; Mounted On: HME Model VT-100 6X4 Tk.; TrEngine: , Cummins 330 HP; Tools/Other Options: Fuller 10 speed transmission.55,000# pullback, main winch with 16,000# single line pull, sand-line winch, 3 cylinder Cat water injection pump, hammer lubricator. Aardvark Slammer casing hammer with hydraulic cylinder & swingout.

Rotary #1620

Ingersoll Rand T4W Year: 2006 QSX 600; Compressor: 1070/380; Mud Pump: NO; Mounted On: CCC; TrEngine: , Cat C-10; Tools/Other Options: Approx. 1300 hours on drill.. Condition: Good.

Rotary #1619

Ingersoll Rand T4W Year: 1982 Detroit 12V71; Compressor: 900/300; Mud Pump: NO; Mounted On: CCC; TrEngine: , Detroit 6V53; Tools/Other Options: Retrofitted in 1982, Less than 500 hours since deck engine rebuild. Worked one year since compressor was replaced in 2002. 400' Drill Rod, 2 winches, 2 carousels, Hammer oiler, 6" Hammer & Bit (good used), 37,500# pullback, various extras included.

Rotary #1617

Ingersoll Rand T4 W Year: 1991 KTA19C 600 HP; Compressor: 1050/350; Mud Pump: NO; Mounted On: CCC; TrEngine: 1991, CUMM; Tools/Other Options: 70,000# Pullback, worm gear head, Cat 25 gpm water injection, 7 rod main, 4 rod aux. carousel, new wheels and tires on rear, rebearing of compressor and complete engine teardown in 2008, 600 hours since. 55 gallon hammer oiler - working condition, night lights. Very nice rig, will demonstrate and delivery options are available. Condition: Good.

Rotary #1613

Ingersoll Rand T4W Year: 1992 K19 525 HP; Compressor: 1050/350 IR HR2; Mounted On: Crane Carrier; TrEngine: 1991, 270 HP; Tools/Other Options: Low hours on new rebuild - Deck engine & Compressor. Worn Gear Top Head, 50,000" pullback, 25 GPM CAT Water Injection, new compressor Cooler with all new hoses. (3) Winches, 1 added for running pipe, 7 pipe carousel, non-mechanical oiler injector.
CC engine is 270 HP @ 2100 RPM, 860 torque @ 1300 RPM.

Rotary #1612

Ingersoll Rand T3W Year: 1988 855 Cummins; Compressor: IR 825/350; Mounted On: Int 1900 Series Truck; TrEngine: Diesel; Tools/Other Options: Hamer Oilier, Water Injection, 360' of 20' X 4-1/2" Drill Pipe. Price includes shipping cost to the Port of Baltimore.

Rotary #1610

Ingersoll Rand T-3 Year: 1994 cat 3406; Compressor: 900-350; Mounted On: Ford L-9000; TrEngine: 1994, 8.3 cummins; Tools/Other Options: 8, 800 hrs, deck engine just rebuilt, water injection,hammer lubricator, 12,000# main winch, rod & pipe rack, carousel, new pull down cables, 300' od 4 1/2" x 20' drill rod. Good operating 6" hammer, all small operating handling tools.

Rotary #1600

Ingersoll Rand TH-60 Year: 1978PTO; Compressor: 250/750 Screw; Mud Pump: 5X6 GD; Mounted On: International Paystar; TrEngine: 1978, Detroit; Tools/Other Options: 700' of 3-1/2" flush rods, desander, bean pump.

Rotary #1569

Ingersoll Rand T4W Long Tower Year: 1981; Compressor: 1050/350 tandem screw; Tools/Other Options: 70,000# pullback. Runs 30' pipe, will set range 2 casing.

Rotary #1560

Ingersoll Rand T-4 Deephole Year: Detroit; Compressor: 1050/350; Mounted On: CCC; Tools/Other Options: New twin spur gear rotary head approx. 500 hours ago. New main pump, new pipe winch cable, fresh service on carrier & deck engine, new Detroit series 60 3000 hours ago. New 1050/350 air end approx. 1000 hrs. ago. Ready to drill. All subs and hand tools to go with rig.
1981 Peterbuilt flat tank water truck, 2000 gallon with tool boxes and 1950' of nice 25' IR 4-1/2" drill pipe. Spare rebuilt rotary head. Condition: Excellent.

Rotary #1557

Ingersoll Rand T-4W Year: 1995 Cummins KT19A; Compressor: 900/350; Mounted On: CCC; TrEngine: 1979, Cummins L-10; Tools/Other Options: Tach reading = 1963. New hydraulics & compressor oil cooler, 5" feed cylinders, rotary head rebuilt 11/07. Minor repairs and leaks as well as handles are currently being repaired with new parts. New truck radiator, new bell housing between engine & compressor Dec "08". No swing out table but does have jib boom & side carousel. Fleet maintained. All maintenance records & oil samples available upon request.

Rotary #1508

Ingersoll Rand T-4 Year: 1998 K-19; Compressor: 1070/350; Mounted On: CCC; Tools/Other Options: Jake brake, just painted. Deck engine overhauled 100 hours ago with warranty. Spurgear head twin motor, 1400' rods, 8" & 6" hammers, diesel preheater, all hand tools. Condition: Very good.

Rotary #1550

Hopper Hoist MTA Reverse Drilling. Year: 6V71& 8V71; Mounted On: tandem axle truck; Tools/Other Options: 5000' Drilling Depth/workover rig. Double drum drawworks, main drum 48" X 10", samdline drum 42" X 10", 4 and 6 lines, 71' X 175,000# hydraulically raised mast, 2 deck engines - both Detroit Diesels with 5 speed transmission. (2) Mission centrifugal pumps, (2) McKissick blocks, 17-1/2" Skytop Brewster rotary table, King swivel, kelly set up for reverse drilling. 4 hydraulic leveling jacks, 560' of 7-1/2" drill pipe, (3) 8" collars, 2 reamers, pipe trailer. Has not been used in several years.

Rotary #1544

Ingersoll Rand T3W Year: 1987 Cummins 855; Compressor: 825/350; Mounted On: Ford L 8000; TrEngine: 1987, Ford Diesel; Tools/Other Options: 4 piston Bean pump, hammer oiler, 320' of 20' drill steel, 4568 hours on drill, new coupler between engine & compressor. 51,925 miles on truck.

Rotary #1549

Ingersoll Rand T-4W Year: 1991; Tools/Other Options: Pkg. also includes:
Rod Truck, (60) joints of drill pipe, 4 check valves, BOP, stabilizer & Bit, Hammer bit.

Rotary #1505

Ingersoll Rand R-300 Year: 1981 PTO; Mud Pump: 5-1/2" X 10; Mounted On: Paystar 5000; TrEngine: 1981, 8V92; Tools/Other Options: 40' Mast.

Rotary #1493

Ingersoll Rand TH 60 Year: 1979 PTO; Compressor: 600/250; Mud Pump: 3X4; Mounted On: Paystar 5000; TrEngine: 1979, 8V71T Detroit; Tools/Other Options: 13 speed, line oiler, 12 gpm water injection, 18,000# winch, 28,000# pullback, 9 rod carousel. Rebuilt in 1994, all new tires on truck, paint is excellent - touched up every spring. 300' of 3-1/2" rod goes with rig.. Condition: Good.

Rotary #1485

Ingersoll Rand TH-60 Year: 1979 PTO; Compressor: 600/250; Mounted On: KW; TrEngine: 1978, Cummins 400 Turbo; Tools/Other Options: Compressor rebuilt 2 yrs ago, low hours. 400' of rod. 32' 45,000# derrick. Drill pipe carousel, 3-1/2" retractable table, 10-3/4" opening. Hydraulic drawworks, 4 - 5-3/4" leveling jacks, drill pipe rack, tool box.

Rotary #1469

Ingersoll Rand TH-60 Year: 1979; Compressor: 750-250; Mounted On: International Paystar5000; TrEngine: 1979, 8 V 92; Tools/Other Options: engine rebuilt 5(7) new clutch 9/06 cotta box rebuilt 9/06 25,600 lb winch, long tower 7 rod carousel, rig runs great.

Rotary #1435

Ingersoll Rand T-4 Year: 1985 V-12; Compressor: 900-300; Mounted On: CCC; TrEngine: 1985, 3208; Tools/Other Options: 70,000 lb machine 1,500' drill rods, 6" and 8" hammers, new chains and sprockets, v-12 new used.

Rotary #1437

Ingersoll Rand T-3 W Year: 1995, 3406 Cat; Compressor: 900-350; Mounted On: Ford; TrEngine: 1995; Tools/Other Options: 520' drill rods, 6" hammer, 8" hammer, 1000 hrs on deck engine, 25 gal water injection.

Rotary #1435

Ingersoll Rand T-4 Year: 1985 V-12; Compressor: 900-300; Mounted On: CCC; TrEngine: 1985, 3208; Tools/Other Options: 70,000 lb machine 1,500' drill rods, 6" and 8" hammers, new chains and sprockets, v-12 new used.

Rotary #1429

Ingersoll Rand T-4 Year: 1991 Cummins; Compressor: 1050-350; Mounted On: CCC; TrEngine: 1991; Tools/Other Options: 70,000 pullback machine,Rebuilt KTA Cummins 19 C engine, water injection, updated Hyd. Drill ready.

Rotary #1427

Ingersoll Rand RD-20 Year: 2006; TrEngine: 2006; Tools/Other Options: Condition: low hrs.

Rotary #1426

Ingersoll Rand RD-20 Year: 2005 cummins qsk 19; Compressor: 1250-350; Mounted On: CCC; TrEngine: 2005, cat 375 hp; Tools/Other Options: jack brake, This machine has 5,000' of drill rods4 1/2 x 30. almost new , spare air compressor.1170-350 I R All slips bushings, lift sling and all small tools. Can run range three casing.mast 125,000lb mast 63'.

Rotary #1403

Ingersoll Rand T-4 Year: 1984 detroit; Compressor: 900-300; Mounted On: CCC; TrEngine: 1984; Tools/Other Options: 6" used hammer and 8" HAMMER, 300' DRILL ROD.

Rotary #1402

Ingersoll Rand TH-60 Year: 1979; Compressor: 600-250; Mud Pump: 3 x 4; Mounted On: Int; TrEngine: 1979, ; Tools/Other Options: 300' drill rod.

Rotary #1401

Ingersoll Rand T-3 Year: 1988 855 cumm; Compressor: 900-350; Mud Pump: wilden mud; Mounted On: Ford 9000; TrEngine: 1988, L 10 300 cumm; Tools/Other Options: 300' drill rod.

Rotary #1396

Ingersoll Rand T-3 Year: 1974; Compressor: 750-250; Mounted On: CCC; TrEngine: 1974, 501 gas; Tools/Other Options: 200' 4 1/2" x 25' drill rods, 3 6"hammers, spare air 450 x 350 truck mounted, rod truck, very good strter rig.

Rotary #1309

Ingersoll Rand TH-60 Year: 197 ; Compressor: 600-250; Mud Pump: 3 x 4 mission; Mounted On: IH Paystar 5000; TrEngine: 1977, 318 Det; Tools/Other Options: 300' of 3 1/2 x 20' drill rod, water injection, sandline, good condition5" hammer.

Rotary #1301

Ingersoll Rand T3 Year: 1997 Cat 3406; Compressor: 900/350; Mounted On: Ford 9000; TrEngine: 1997, CAT C10; Tools/Other Options: 8700 original hours on drill, standard derrick, 18k winch, 18 gpm injection pump. 4 new head motors 6/06, new traction tires, new air-oil seperater 8/06, new exhaust on deck engine 10/16, new left rear leaf spring 10/06, 4 new brake canisters and automatic slack adjusters 10/06, new pull down cables 8/06, new paint. Comes with 300' of 3-1/2" drill rod and 6" & 8" hammers. 36,600 miles on truck, jake brake. Condition: Excellent.

Rotary #1271

Ingersoll Rand TH-60 Year: 1976 ; Compressor: 600-250; Mud Pump: 3 x 4; Mounted On: Ford L 9000; TrEngine: 1976, 8 V 92; Tools/Other Options: 420' drill rods.

No

Picture

Available

Rotary #1157

Ingersoll Rand T-3 Year: 2000 3406; Compressor: 900-350; Mud Pump: 3x4 centerfigual; Mounted On: IH 2654; TrEngine: 2000, 3406 Cat; Tools/Other Options: 12,000 lb winch, mud pump, 500ft drill rod.

Rotary #739

Ingersoll Rand T-4 Year: 1977 3406B 600 hp; Compressor: 750/150; Mounted On: Ford 9000; TrEngine: 1989, 400 Cat; Tools/Other Options: 325' 4-1/2' X 3-1/2" API Steel, New SF6 Hammer, New 6" Bit, good 8" bit, 2150# torque set up for big air tank, fresh 4 hole funk box, 1 new PGD Denison main pump, 2 new fant slow feed pumps, all new hoses on machine except for feed group, 4 jack system. 25 GPM Cat water injection, Twin Carousels, needs paint. Condition: well maintained.