Rotary #1679

Speedstar SS-16 Year: PTO; Mounted On: 4 axle CCC; TrEngine: 1976, Cummins K-19; Tools/Other Options: PRICED AT PACKAGE DEAL:
8-1/2" Franks rotary table, speedstar 2000 double drum drawworks, hydraulic winch line, CCC has hydraulic leveling jacks, toolboxes. 137' 30' 2-7/8" American open hole steel, misc. hand tools. Also includes 1979 GMC school bus/doghouse. Emsco D175 7-1/4" X 12" duplex mud pump with Detroit Diesel 6V71 engine. 30 ton king swivel, 2005 wacker light tower, 1987 Ford L-9000 flatbed with pintle hitch, 1977 shop built pipe trailer, 1999 case super L backhoe with bucket & forks, 1981 Peterbuilt water truck, 2006 Ford F-350 crew cab pick-up truck, Rausch pipe spinners.

Rotary #1665

Speedstar SS-15 III Year: 1978; Compressor: 256S2 Leroi; Mud Pump: fm 45; Mounted On: International; TrEngine: 1978, Tools/Other Options: Single rod loader, Bean water injection pump. Loaded with options. Like new condition. Condition: Good.

Rotary #1367

Speedstar SS 15 111; Mud Pump: 2 mission 4x3x13 mud pump; Mounted On: Int. TrEngine: 1991, Cummins; Tools/Other Options: 7.5 Mckissick block, 8" retractable table, 22' fluted kelly, 3" swivel, 40' mast, 4 jacks, reverse air capable, rod spinner, 400' 2-7/8" if 20' drill rod, completely rebuilt.

Rotary #1661

Schramm T-64 Year: 1975 8V Detroit; Compressor: 750/350 Retrofitted; Tools/Other Options: (1) 15' Stabilizer
(1) 6" Hammer
(1) 8" Hammer
200' Steel.

Rotary #1657

Speed Star 15K Year: 2002 Cat 3126; Compressor: Sullair; Mud Pump: 5X6; Mounted On: ; TrEngine: , ; Tools/Other Options: Mud Tub, water injection, rod box, (2) jib booms, main winch, sandline winch, break out wrench, floating shock sub, tool boxes.

Rotary #1642

Shop Built Year: 471 Diesel; Mud Pump: 3X4 centrifical; Mounted On: Chevy 6X6; Tools/Other Options: Tophead, walking beam, 100' of drill steel. Good for 2" and 4" diameter wells up to 400' depth. Very fast rig.

Rotary #1647

Shop Built Year: 2007 36 hp Kubota; Tools/Other Options: Power swivel, 200' of 2-3/8" Mayhew JR steel in 10' sticks, 100' of CA21 1-1/2" & a few new bits from 2" to 7". Runs like a top. Rated at 300' depth capacity, 8" diameter hole, can also drill at an angle. Condition: Good.

Rotary #277

Speedstar SS15 Year: 1986 450 Cummins Diesel; Compressor: 900/350 GHH; Mud Pump: weilan; Mounted On: CCC; TrEngine: 1970, 290 Cummins; Tools/Other Options: 40' Derrick, Triple Drum Drawworks, Bean Water Injection, (4) Hydraulic Outriggers, Racking Board, Top Head Drive. Condition: Good.

Rotary #1629

Speedstar 71; Mounted On: GMC chassis; Tools/Other Options: engine rebuilt 2008 Working drill, new:counter shaft,clutch&bearing plates, pinion spudder drive, crank gear, shaft, bearings, sand sheave, crown sheeve.

Rotary #1628

Speedstar 71; Mounted On: ford; Tools/Other Options: working and fully equipped, engine rebuilt 2007
ALL new spudder&shave assembly,sheave,bushing,shaft,hubreel-sheave&bushing,counter shaft,clutch and bearing plates,pinion&spudder drive,crank gear, and shaft&bearings.

Rotary #1621

Schramm T64 Year: 1977 Detroit; Compressor: 300/600; Mounted On: GMC; TrEngine: 1977, 6V53 Detroit; Tools/Other Options: 1800 hrs. on compressor since rebuild. 200' of drill steel. 55,000 miles on truck, 13 speed transmission. Detroit runs good. Condition: Ready to Drill.

Rotary #1618

Schramm T64HB Year: 1978 Det. V8 Diesel; Compressor: Sullair 750/250; Mud Pump: NO; Mounted On: GMC T3; TrEngine: , CAT V8; Tools/Other Options: (20) Rods - 7 meters each.

Rotary #1609

Speedstar SS 135 Year: 1978; Compressor: leroi air; Mud Pump: 5x6 GD; Mounted On: International; TrEngine: 1995, DT 466; Tools/Other Options: 3 Jacks,8 1/2" retractable table, 4"kelly, 2 line machine. Condition: Excellent.

No

Picture

Available

Rotary #1599

Schramm T 64 HB/912 Year: 1976 8V71 Detroit; Compressor: 425/250; Mounted On: GMC 6500; TrEngine: 1976, 454; Tools/Other Options: Drilling platform has had good maintenance, includes recently rebuilt compressor (est. 600 hrs on rebuild). New batteries, new top pulley etc. Rigt comes with 400' of drill steel and many other items such as extra compressor blocks, cams, cranks, pistons, rebuilt supercharger, extra supercharger, drill bits, cables, subs, casing collars, various air, oil and fuel filters along with other drilling supplies.

No

Picture

Available

Rotary #1592

Speedstar SS 40 Year: 2007.

No

Picture

Available

Rotary #1593

Speedstar SS 40 Year: 1982.

Rotary #1575

Schramm T64HB-1245 Year: 1978 Detroit 8V71; Mounted On: 1978 GMC 6X4 Chassis; TrEngine: Detroit 6V53; Tools/Other Options: Truck engine over heated and locked-up. Deck compressor is missing. CAT 10 GPM water injection pump, drill pipe rack, 4 rod carousel, auxiliary hydraulic winch.

Sullair 750 cfm/250 psi compressor - skid mounted, powered by a Detroit 8V92NA engine.

1976 Cabover Chassis P/B Cummins 300 HP engine (locked up) 25' 2,000 gallon flat water tank.

Approx (10) 4-1/2" X 20' Drill Collars
Approx. (15) 4-1/2" X 20' Drill Pipe
Approx. (15) 3-1/2" X 20' Drill Pipe.

Rotary #1563

Schramm 685 Year: 1989 Detroit 6V92; Compressor: 900/350; Mounted On: GMC White; TrEngine: 1989, Cat 3208; Tools/Other Options: 200' 4-1/2" X 3-1/2' API Thread drill pipe, 6" hammer & an 8" Mincon hammer. 5300 hours on rig. Also includes all small hand tools, slips & bushings, J Wrench.

Rotary #1545

Schramm 450 Year: 2000 3406; Compressor: 845/350; Mud Pump: 3X4 Cent.; Mounted On: L-9000 Ford; TrEngine: , 400 HP Cummins N-11; Tools/Other Options: 25 GPM Cat water injecrtion pump, 600' of 3-1/2" X 20 2-7/8" drill steel, sand line, all small hand tools included, (1) 4" (1) 5" and (1) 6" hammer. Jake brake, 50,000 miles on truck, 4500 hours on rig.

Rotary #1513

Speedstar SS-22 Year: 2005; Mud Pump: FY-FXD; Mounted On: Mack; TrEngine: 2005, 427 Mack; Tools/Other Options: 3 drum drawworks, 18" retractable table, 4450 hours on rig.

Rotary #1512

Speedstar SS-22 HDM Year: 1980; Mud Pump: FO-FXO; Mounted On: CCC; TrEngine: 1980, 435 hp Cummins; Tools/Other Options: FO-FXO deck pump, 3 drum drawworks, 10" retractable table, racking board.

Rotary #1511

Speedstar 70K Year: 1984 PTO; Mounted On: CCC; TrEngine: 1984, KTA 450; Tools/Other Options: Most of the hydraulic motors & pumps are new. Less than 150,000 miles.

Rotary #1507

Speedstar SS-40 Year: 8V71; Compressor: Leroy 256 S2 500/250; Mounted On: Int. R-90 Series; TrEngine: 1966, Gas; Tools/Other Options: 9" Rotary table - Rebuilt & Retractable. Approx. 42' Derrick w/ crown nest, 15' X 4-1/2" Drill Rod, 23' - 3 Flute Kelly, Rebuilt draw works including jack shaft, 3 leveling cylinders, air cooler & kelly needs help. Truck engine & drill engine have been rebuilt.

Rotary #1494

Schramm T64HB Year: 1976 Detroit 8V71; Compressor: 425/250; Mounted On: GMC 6500; TrEngine: 1976, 454 HP; Tools/Other Options: Well maintained, lots of extras. Striker hammer, recently rebuilt compressor, new batteries, new retread tires, new top pulley. Also available at extra cost: 400' of steel, rebuilt compressor head, rebuilt supercharger, extra supercharger, extra compressor block, bits, drilling supplies, plus many engine parts. Condition: well maintained.

Rotary #1481

Speedstar SS-135 Year: 1985 PTO; Compressor: Leroi 990A; Mud Pump: GD 5-1/2"X8; Mounted On: Int. Speedstar Truck; TrEngine: 1984, 210 HP DT 466; Tools/Other Options: Truck mileage 160,926, 1642.9 hours, GVWR Front axle 12,000, GVWR Rear axles 34,000, 13 speed transmission, air brakes, 32' Mast with 5" X 24' Kelly, 4 leveling jacks, 3" Swivel with reverse air plumbing and 8'1/2" retractable table. Hydraulic pulldown (variable pressure), cathead, hydraulic breakout cylinder, drillers platforms.

No

Picture

Available

Rotary #1479

Speedstar sd 200 Year: 1991 pto; Compressor: Sullair 500 x 200; Mud Pump: 5 x 6 rebuilt faiLing; Mounted On: INT; TrEngine: 1990, 400 hp cumm; Tools/Other Options: rebuilt engine,mud pump rebuilt,air compressor new only used 3 times,10k winch able to part line 4 times.hy breakout,4 jacks,sliding head, can drill 20'" WELL.

Rotary #1369

Speedstar SS-10 Year: 1980; Compressor: 100 SDS Leroi; Mud Pump: 5 x 6 GD; Mounted On: Ford L 8000; TrEngine: , Cummins 325 hp; Tools/Other Options: chain pulldown, 8" retractable rotary table, air clutches, air throttle, 35' derrick, breakout tongs.

Rotary #1463

Speedstar 700 Year: 1988; Compressor: joy 700-300; Mud Pump: 3" diaphtam pump; Mounted On: Int.; TrEngine: 1988, cumm 300; Tools/Other Options: rod box, single rod loader, 2 cyl. Injection pump,300' drill rod 3 1/2 x 20' breakout wrench, sliding fork wrench.

Rotary #1461

SDSpeedstar ss35, 8 V 71; Mounted On: trailer mounted; Tools/Other Options: 60' mast over table, 18" speedstar table 34-275 rpm, double drum, 18.000 single line. Hydro matic breaking, part 6 times each line, extra 3line (sand line 10,000 single) swivel track, subbase, air clutches. Running machine, great shape-200 Year: 1995 pto; Compressor: Sullair 300x200; Mud Pump: failing 5x6 Mounted On: Ford; TrEngine: 1995, Ford diesel; Tools/Other Options: mud pan ,rod rack,single, rod loader.19 3"X 20' DRILL PIPE, MJ THREAD. 4 2"x20' drill pipe, 1 6" hammer.

Rotary #1458

Speedstar SD-200 Year: 1995 pto; Compressor: Sullair 300x200; Mud Pump: failing 5x6 Mounted On: Ford; TrEngine: 1995, Ford diesel; Tools/Other Options: mud pan ,rod rack,single, rod loader.19 3"X 20' DRILL PIPE, MJ THREAD. 4 2"x20' drill pipe, 1 6" hammer.

Rotary #1436

Year: 1986 v-6 detroit; Compressor: 600-350; Mounted On: Ford; TrEngine: 1986, ford diesel; Tools/Other Options: 15,000 miles on truck, 4,500 hrs on rig, 240' drill rod.

Rotary #1408

Speedstar SD 600 Year: 1985; Compressor: 600 x 250; Mud Pump: 5 x 6 GD; Mounted On: Ford; TrEngine: 1985, 400 cummins; Tools/Other Options: 300' drill rods, 4 jacks.

Rotary #1394

Speedstar SD 30 Year: 2005; Mud Pump: 5 x 6 GD; Mounted On: Int 7400; TrEngine: 2005, DT 466; Tools/Other Options: Sand separator, top head with jib controls on both sides. Front and rear jacks, 10 29' rods with 2 subs, mud pan, breakout wrench.

No

Picture

Available

Rotary #1391

Speedstar SD-200 Year: 1988; Compressor: 250-300; Mud Pump: wieland; Mounted On: Int. 1800; TrEngine: 1988, Cumm; Tools/Other Options: 600' 3" x 20'.

Rotary #1387

Speedstar SD 30 Year: 1996; Compressor: 200 x 100 Sullair; Mud Pump: 5 x 6 GD; Mounted On: Int.; TrEngine: 1995, DT 466; Tools/Other Options: 10,000 hrs on rig, rebuilt top head, single axel, rebuilt 5 x 6 mud pump, new winch line cable, spare top head, new transfer case, 9 gal water injection pump, 200 gal water tank, tool boxes.

Rotary #1380

Simco 5000 Year: 1979; Mud Pump: 4 x 3; Mounted On: Ford; TrEngine: 1979, 300 Ci ford; Tools/Other Options: 2 winches, grout pump, 265' drill rods 2 3/8 x 15', 2 rear jacks, tandem Axel.

Rotary #1353

Speedstar SS 15 111 Year: 1979; Compressor: 500 x 250 leroi; Mud Pump: 3 x 4; Mounted On: GMC General; TrEngine: 1979, 290 Cumm; Tools/Other Options: top head, 300' 3 1/2 x 2 3/8 20' drill rods, stablizers and bits.

Rotary #1369

Speedstar SS-10 Year: 1980; Compressor: 100 SDS Leroi; Mud Pump: 5 x 6 GD; Mounted On: Ford L 8000; TrEngine: , Cummins 325 hp; Tools/Other Options: chain pulldown, 8" retractable rotary table, air clutches, air throttle, 35' derrick, breakout tongs.

No

Picture

Available

Rotary #1366

Speedstar SS 135; Compressor: Development; Mud Pump: 5 x 6 GD; Mounted On: Ford F 750; TrEngine: 1988, diesel; Tools/Other Options: 300' of 15' drill rod, 8 1/2 table, rod rack.

No

Picture

Available

Rotary #1356

Simco 2800.

Rotary #1270

1984 Simco Model 5000; Compressor 235-125;
Mud 3 x 4 mission; Mounted Int Tr 1981 466. Tools/Options 200'drill rod.

Rotary #1346

Speedstar SS 5 Year: 1977; Mud Pump: 4 1/2 x 5 GD; Mounted On: Ford; TrEngine: 1977, Diesel; Tools/Other Options: 270' 2" IF drill rod.

Rotary #1315

Speedstar SD50 Year: 1999; Compressor: 300/200 air; Mud Pump: 5X6; Mounted On: Peterbuilt AWD; TrEngine: 1999, Cummings; Tools/Other Options: 2006 - new hydraulics, pumps, mtors, charge pumps. All new gauges in control panel. New injectors, pump and ECM in Cummings in 2005. Rig has approx 7500 hrs, truck has approx 30,000 miles. 580' 2-7/8" rod X 2-3/8" MJ. 5" hammer with casing driving head.
1997 INTERNATIONAL D444T TRUCK WITH 1000 GAL POLY TANK. 100 GAL FUEL TANK with electric fuel transfer pump. 2005 MILLER 225 WELDER 8500 watts
Equipment runs daily. Condition: Good.

No

Picture

Available

Rotary #1314

Speedstar 150 Mounted On: CCC 4 x 4; Tools/Other Options: 150,000 lb pullback.

No

Picture

Available

Rotary #1305

Stardrill 200 Year: 1990; Compressor: Piston, development; Mud Pump: 5X6 GD Piston; Mounted On: IHC PTO Drive; TrEngine: , ; Tools/Other Options: Also has a 3X4 centrifigual mud pump. GD mud pump needs rebuilt. Side mounted grout pump, rod rack & slide, single rod loader, breakout wrench. Tophead with 2 speed head. 400' 3-1/2" X 20' drill rod.

Rotary #1264

Schramm T-64 Retro Year: 1975 8 V 92; Compressor: 850-350 GHH; Mounted On: Peterbuilt; TrEngine: 1988, L 10 Cummins; Tools/Other Options: 300' drill rods, rebuilt in 1998.

No

Picture

Available

Rotary #1227

Schramm T-450 Year: 1994 6 v 92 T; Compressor: GHH 750-300; Mud Pump: no; Mounted On: Ford 9000; TrEngine: 1994, 6 cyl. Diesel; Tools/Other Options: 240' 4 1/2 x 20' drill rod, 6" hammer, stablizer with cone bit, 300 hrs on rebuilt deck engine, painted and refubished.

Rotary #1223

Schramm t-64 Year: 1974 8 V 71; Compressor: 425-250; Mud Pump: NO; Mounted On: Int AWD/; TrEngine: 1974, 6 V 71; Tools/Other Options: 100' drill rod.

Rotary #938

Simco 2400 Year: 1986 Mounted On: Trailor; Tools/Other Options: High torque drilling head, w/ extra drilling top head, safety hammer,50 ft. of cme 2 1/4 hollow stem auger, split spoons and slip rings. Condition: very good.

No

Picture

Available

Rotary #740

Smeal 5-T Mounted On: Ford L7000; TrEngine: 1978, 391 Gas Engine; Tools/Other Options: 5 Speed Transmission, 2 speed axle, utility bed,
Trailer hitch, pipe rack. Condition: Good.

Rotary #642

86 Speedstar ss 135 300-250 air Compressor, 2 G.D. 5x6 Mud Pump. 10" retractable table, air cylinders, new kelly by 24' 3" id opening, new king swival 3".ss 15 drawworks,air cylindersrod box,both pulling drums and sand drum have new bearings and seals. Air cylinders installed on both pulling drums to operate clutches.new sprocket installed on one side reasealed all three leveling jacks. Replaced crown sheave bushing and shaft.replaced pins and bushing in pull down idler sprockets,replaced mud pump gear end bearings,seals and brass.fluid ends have been rebuilt, the 256 leroy air compressor has been rebuilt. Rig to be painted.45k pullback, 20k pulldown, mast 38' will set 16" casing. Mounted On 1986 Inter tadem, w/ DT 466. Rebuilt Condition.